DUNCANSON 25 "PUHKET SPORTS 8"



foto barca a vela phuket sports 8

One Design Sports Racing Yacht -

foto sports8
The 'Phuket Sports 8' is an exhilarating new one design sports racer designed and developed by Price Phillip design award winner John Duncanson. The original design concept was born in the island province of Phuket, Thailand where a group of very competitive, ex-patriate yachtsman recognized the need for a no compromise, hi-performance, trailerable sports racer that would also offer very basic accommodation for occasional over-night stays.


Performance |
Video clips
|
Design-features |
Standard Features |
Deck hardware
|
Running rigging/systems |
Construction and finish
|
Specifications
|


Performance -

The Phuket Sport 8s sailing performance can only be described as outstanding in all wind ranges. Her huge sail area / displacement ratio ensures her light air performance is second to none and medium to heavy air planing speeds that are easily maintained into the high teens. The PS8 extreme draft of 2.4 meters ensures upwind speed and pointing ability superior to most 30 foot racing designs.

Video clips

video sports8
video sports8


Design-features

phuket sports8 bolina phuket sports8 rimessaggio phuket sports8 lasco phuket sports8 virata


> Folding wings reduce the overall beam from 3.4 to 2.3 meters allowing for road legal trailering with the family car.
> Easily sailed with 3-4 people and raced with 5-6
> Exhilarating one-design or club racing in all conditions
> 4 full length berths
> Extremely efficient sail control systems with no deck winches
> Fully retractable Keel and Rudder for shallow water cruising, hard.standing and trailering

Standard Features

duncanson 25 phuket sports8 foto formato jpg phuket sports 8 di lasco foto formato jpg phuket sports 8 in planata foto formato jpg phuket sports 8 al traverso

> Spars: The PS8 features high-end rigging and foil components usually only found on no- expense spared one-off racing yachts. A carbon fiber mast coupled with twin swept back carbon spreaders, and carbon boom

> Bow Pole: The retractable carbon bow pole extends 2.8m and articulates 28 degrees port & stb.

Standing Rig: All Dyform 316 stainless and no backstay.

> Foils: Retractable carbon fiber keel and rudder fin. Lead keel bulb and carbon fiber tiller and rudder box.

> Sails: Quantum Fusion M working sails and AIRX asymmetrical spinnakers.

> Safety: The folding wings on the PS8 are watertight offering additional stability and positive buoyancy in the event of a knock-down or swamping. Anodized aluminum Pushpit, Pulpit and stanchions coupled with 316 stainless wire offer additional crew security.


Deck hardware

One of the most important aspects of the modern, high performance sports yacht is the rig and sail control systems. In the Phuket Sport 8 these are all run below decks where possible.

> Automatic take up reels for the Spinnaker halyard and Spinnaker tack line. These bungee tensioned reels (situated under the cockpit control console.) automatically take up the line tails keeping the cockpit free of ...tangles and knots during spinnaker sets and drops.
> Mainsail-traveler, boom-vang and bow-pole extender/retractor lines are endless and travel under the cockpit, freeing the cockpit from rope tails and ends.
> Mainsail-foot, cunningham and Bow-Pole traverse controls lead under deck to the central cockpit console.
> Ronstan / Fredrikksen deck hardware
> Ronstan tiller extension
> Barlow keel lift and halyard winch
> Carbon fibre rudder tube and 316 stainless retaining pin
> Alloy pulpit, pushpit and stanchions

Running rigging/systems

Main and Jib halyard------6 mm spectra
Spin halyard----------------6 mm spectra
Spin sheets----------------8mm tapered to 6mm spectra
Main sheet----------------- 3:1 hi speed / 6:1 low speed in 7mm polyester
Tack line-------------------- 6mm spectra
Jib sheets------------------ 2:1 7mm spectra
Main outhaul--------------- 8:1 6mm spectra
Bow pole articulation----- 4:1 6mm spectra
Main traveler control------ 4:1 4mm polyester
Main Cunningham--------- 2:1 6mm spectra
Boom Vang----------------- 6mm spectra
Spin tweekers------------- 4mm polyester
Keel lift:------------------- - 8:1 in 8mm spectra

Construction and finish

A state of the art CAD / CAM, epoxy, monocoque construction system is used to meet the demands and extremely high stresses placed on today’s modern sports-yacht. Boats are constructed under license in Australia and Phuket to the highest specifications.

> Hull and decks are Durakore, epoxy / e-glass sandwich and polyurethane finished.
> Keel and rudder foils are female moulded, vacuum bagged all carbon fiber construction.
> Carbon fiber tube tiller and rudder box
> Interior is finished in epoxy textured white.
> Beige or light grey deck non-skid

Specifications

Metric --------- Imperial

Length 0verall 7.80 m ------- 25.2 ft

Maximum beam 3.37 m ------- 11.1 ft

Beam (wings folded) 2.35 m ------- 7.7 f

Displacement 950 kg ------- 2090 lbs

Fin and lead bulb 300 kg ------- 660 lbs

Draft Minimum 0.40 m ------- 1.3 ft

Draft Maximum 2.40 m ------- 8.0 ft

Mainsail area 25.6 m ------- 276 ft

No. 1 Jib 16 m ------- 172 ft

Spin. Masthead 94 m ------- 1,010 ft

Spin Hounds 68 m -------- 750 ft



sail profile


layout puhket sports 8
layout


<< Torna indietro